I've recently bought a Fuseworks Microwave Kiln - and am having great fun with it.
(do take care to read all the Instructions that come with it.)
You get all the beginner's essentials to practice with - (as shown on the box.) You do have to buy Goggles separately - which are essential when cutting glass, and as you get more practiced, you will want different tools.
At first, it's a little nerve-racking - but you get used to the timings, and you wont have to sit in front of the microwave - watching for the full length of time! I still make sure that I unplug the micro each time I've finished though ....... just in case :)
The thicker the pieces of glass, obviously the longer the timing for firing will be.
NEVER take the microwave kiln out without wearing the special heat-resistant gloves, or touch the glass until it has cooled down for minimum of 30 mins.
There are lots of very good videos on You-Tube for Fusing Glass in a Microwave Kiln.
At first, it's a little nerve-racking - but you get used to the timings, and you wont have to sit in front of the microwave - watching for the full length of time! I still make sure that I unplug the micro each time I've finished though ....... just in case :)
The thicker the pieces of glass, obviously the longer the timing for firing will be.
NEVER take the microwave kiln out without wearing the special heat-resistant gloves, or touch the glass until it has cooled down for minimum of 30 mins.
There are lots of very good videos on You-Tube for Fusing Glass in a Microwave Kiln.
 | |||
here are a few of the small pendants/pieces I have made - experiments, but quite pleased with them |
No comments:
Post a Comment